Send Message
China Scuba Diving Scooter manufacturer

Practical Brass Scuba Stage 1 Regulator , Anti Freeze Cold Water Scuba Regulator

Product Details:
Place of Origin: China
Brand Name: ZTDIVE
Certification: CE,FCC, PSE
Model Number: ZT-101Y
Payment & Shipping Terms:
Price: MSRP:USD350
Packaging Details: Cartons
Payment Terms: T/T

Detail Information

Model: First Stage Head Regulator Type: DIN/INT
Material: Chrome Plated Brass Weight: 590g/DIN
Relative Medium Voltage: 0.9±0.1mpa Use: Scuba Diving
High Light:

Practical Scuba Stage 1 Regulator

,

Brass Scuba Stage 1 Regulator

,

Anti Freeze Cold Water Scuba Regulator

Product Description

ZT101Y Diving First Stage Head Regulator Brass Material Silver Appearance

Regulator First stages ZT101Y

 

Practical Brass Scuba Stage 1 Regulator , Anti Freeze Cold Water Scuba Regulator 0Practical Brass Scuba Stage 1 Regulator , Anti Freeze Cold Water Scuba Regulator 1Practical Brass Scuba Stage 1 Regulator , Anti Freeze Cold Water Scuba Regulator 2

Descriptions

Superbalance diaphragm type first stage head, external adjustable relative medium pressure, allowing technicians to quickly medium pressure fine tuning

The Marine grade brass body protects the internal components from water and contaminants while improving cold water performance

The triangulated high and middle pressure hole position provides abundant take over position, the main regulator and the standby regulator can be installed side by side horizontally without affecting each other

 

Specifications

Ports 4 medium pressure ports 3/8 "to 24UNF thread size, 2 high pressure ports 7/16" to 20UNF thread size/fixed medium pressure hole size
Relative medium pressure 0.9±0.1mpa
Model Balanced diaphragm type
Type DIN/INT is optional
Average output flow 1000 L/min
Weight 590 g /DIN

 

Warning

 

(1) Do not assemble the low pressure tube on the high pressure hole of the first level unloader (with HP), nor connect the high pressure tube to the low pressure outlet of the first level unloader.

(2) The two-stage compressor is the medium-pressure air from the low-pressure outlet of the first-stage compressor, and the pressure is 0.95± 0.05mpa.

Select the high pressure pipe and medium pressure pipe to connect the hole.

Turn the high pressure plug and low pressure plug counterclockwise using a hex wrench.

Reserve these high and low pressure plugs for future use.

Base some lubricating oil to end thread of tube and o-ring (silicone oil may also be used, but silicone oil equipment should not be used on high oxygen diving).

Turn the pressure pipe clockwise to the corresponding outlet and use the torque tool to tighten the torque value. The torque value of the tool should be 40in-lbs.

Get in touch with us

Enter Your Message

You Might Be Into These